HPE4-A51 sample questions

Question 1

You are designing a configuration hierarchy in HPE Aruba Networking Central for a multinational corporation with sites in New York, London, and Tokyo. The requirement is to have a global SSID configuration for 'Eduroam' but distinct RF profiles for each region due to regulatory domain differences. Which approach best utilizes Central's Group and Site architecture to minimize administrative overhead?

Accepted Answer

Create three separate UI Groups (NY, LON, TYO), configure the Eduroam SSID identically in each, and apply specific RF profiles to each group.

Answer

Create a Template Group for the APs and use variable interpolation for the Regulatory Domain setting only.

Answer

Create a single Global UI Group with the Eduroam SSID and use Site-level overrides for the RF profiles.

Answer

Create a single Global UI Group and use Label-based configuration to apply different RF profiles based on device tags.

Question 2

An engineer needs to replace a failed AOS-CX switch that is managed by HPE Aruba Networking Central. The new switch is the exact same model. Which workflow ensures the new switch receives the exact configuration of the failed unit with minimal manual intervention?

Accepted Answer

Use the 'Replace Device' workflow in the Central Device Inventory, select the down device, and map it to the new device serial number.

Answer

De-provision the old switch, wait 15 minutes for the license to release, then provision the new switch and restore the configuration from a local backup.

Answer

Manually copy the configuration from the Audit Trail of the old switch and paste it into the console of the new switch before connecting it to the network.

Answer

Add the new switch to the Device Inventory, assign it to the same Group as the old switch, and Central will automatically push the group configuration.

Question 3

You are deploying a pair of Aruba 9004 Gateways at a branch site. The site has no local IT staff. You plan to use One Touch Provisioning (OTP). Which of the following statements correctly describes the OTP requirement for these gateways?

Accepted Answer

True

Answer

False

Question 4

A network administrator is creating a configuration template for AOS-CX switches in Central. They need to ensure that the hostname of each switch is dynamically set based on the device's properties defined in the variable file. Which syntax correctly represents the variable for hostname assignment?

Accepted Answer

%hostname%

Answer

#hostname#

Answer

${hostname}

Answer

Question 5

When moving a pre-configured AP from a 'Test' UI group to a 'Production' UI group in HPE Aruba Networking Central, what happens to the AP's configuration?

Accepted Answer

The AP is automatically rebooted and adopts the configuration defined in the 'Production' group, losing previous group-level settings.

Answer

The AP retains its 'Test' configuration as local overrides until manually cleared.

Answer

The AP merges the 'Test' configuration with the 'Production' configuration.

Answer

The AP enters a 'Config Mismatch' state and requires manual intervention to accept the new group profile.

Question 6

You are auditing a customer's device inventory in HPE Aruba Networking Central. You notice several switches have a 'Sync Status' of 'Not Synced'. Upon investigation, you find that local changes were made via CLI. Which action in Central enforces the group configuration and overwrites the local changes?

Accepted Answer

Move the device to a different group and back, or disable and re-enable Central management on the device (if possible), but typically you must resolve the config conflict by pushing the Central config again.

Answer

No action is needed; Central automatically overwrites local changes every 24 hours.

Answer

Clear the 'Configuration Audit' errors from the device monitoring page.

Answer

Enable 'Auto-Commit' in the Group settings.

Free HPE4-A51 sample questions

An engineer needs to replace a failed AOS-CX switch that is managed by HPE Aruba Networking Central. The new switch is the exact same model. Which workflow ensures the new switch receives the exact configuration of the failed unit with minimal manual intervention?

You are deploying a pair of Aruba 9004 Gateways at a branch site. The site has no local IT staff. You plan to use One Touch Provisioning (OTP). Which of the following statements correctly describes the OTP requirement for these gateways?

A network administrator is creating a configuration template for AOS-CX switches in Central. They need to ensure that the hostname of each switch is dynamically set based on the device's properties defined in the variable file. Which syntax correctly represents the variable for hostname assignment?

When moving a pre-configured AP from a 'Test' UI group to a 'Production' UI group in HPE Aruba Networking Central, what happens to the AP's configuration?

6 more free samples are waiting