Free 500-560 sample questions

Correct answer: Low Latency Queuing (LLQ)

Low Latency Queuing (LLQ) adds a strict priority queue to Class-Based Weighted Fair Queuing (CBWFQ). This allows delay-sensitive data such as voice to be dequeued and sent before packets in other queues, making it the ideal choice for VoIP traffic prioritization. WFQ and CBWFQ provide fairness and bandwidth guarantees but do not offer the strict priority needed for voice.

Correct answer: Switch priority

In a Cisco StackWise stack, the switch with the highest user-configured switch priority value (from 1 to 15) is elected as the stack master. If priorities are equal or not configured, other tie-breakers like configuration level and MAC address are used, but priority is the primary deterministic method.

Correct answer: False

False. Meraki provides a 30-day grace period after the license expires. During this time, the network continues to function normally, but administrators cannot make configuration changes. After the grace period ends, devices will stop passing traffic.

Correct answer: Cisco Umbrella

Cisco Umbrella is a cloud-delivered security service that provides the first line of defense against threats on the internet by blocking malicious DNS requests. It is ideal for protecting remote workers off-VPN by enforcing security at the DNS layer, preventing connections to malicious destinations.

Correct answer: On the MX Security Appliance under 'Security & SD-WAN -> Addressing & VLANs'

In a Meraki network, the MX Security Appliance acts as the Layer 3 gateway and handles inter-VLAN routing. This is configured under the 'Security & SD-WAN -> Addressing & VLANs' page by defining VLANs and their associated subnets. The MS switches operate at Layer 2 by default in this topology, forwarding traffic to the MX for routing decisions.

Correct answer: To provide a centralized point of presence for guest user traffic on the corporate network.

The Anchor WLC provides a fixed point of presence for client traffic, most commonly for guest wireless access. When a guest user roams to an AP on a Foreign WLC, their traffic is tunneled back to the Anchor WLC. This ensures that all guest traffic exits the network from a single, controlled point (often in a DMZ), maintaining a consistent IP address and security policy.

Correct answer: Deploy the Meraki MV Smart Camera Connector to stream video to an on-premise NVR.

The best solution is using the Meraki MV Smart Camera Connector. This allows video to be stored on an on-premise Network Video Recorder (NVR), which can be configured for 180-day retention without consuming WAN bandwidth for constant cloud archiving. This hybrid approach keeps video traffic local while still allowing for cloud management and analytics, satisfying both the long-term storage and low-bandwidth constraints.

Correct answer: Direct Attach Copper (DAC) cable

Direct Attach Copper (DAC) cables are the most cost-effective and simplest solution for short-distance (typically up to 7-10 meters) 10G connections between switches in the same rack or closet. They are fixed-length cables with integrated transceivers, eliminating the need to purchase separate transceivers and fiber patch cords, which reduces cost and complexity.

Correct answer: Implement Policy-Based Routing (PBR) on R1 to match the destination subnet and set the next-hop to R2's primary link IP.

Policy-Based Routing (PBR) is the correct tool for this requirement. OSPF makes decisions based on the destination address and link cost, which applies to all traffic. PBR allows the administrator to override the routing table for specific traffic based on a wider set of criteria (like source/destination address). By creating a route map that matches traffic destined for 10.10.100.0/24 and setting the next-hop to the primary link, the engineer can force that specific traffic over the desired path, regardless of the OSPF metric.

Correct answer: Behavioral Metrics

Behavioral Metrics within Cisco DNA Spaces provide insights into visitor behavior, including path analysis and journey tracking. This allows businesses to understand common paths, see which zones are visited in sequence, and analyze how visitors navigate the physical space, which is invaluable for optimizing layouts and engagement.