Free D-PVM-OE-23 sample questions

Correct answer: Put hosts in maintenance, perform symmir cutover, verify host paths, take hosts out of maintenance.

The correct NDM cutover process involves minimal disruption. The hosts should be quiesced or put into a maintenance mode to ensure application consistency. Then, the `symmir -g cutover` command is executed, which swaps the personalities of the source and target devices. After the cutover, it's crucial to verify that the host multipathing software has correctly discovered the new paths to the target PowerMax array. Once paths are verified, the hosts and applications can be brought back online. Unmounting filesystems is generally not required for a non-disruptive migration.

Correct answers: The storsrvd daemon is not running on the SEVA.; The SEVA has not been configured with Gatekeeper devices.

The storsrvd daemon is essential for Solutions Enabler to discover and communicate with storage arrays. If this daemon is not running, no SYMCLI commands will succeed.

Gatekeeper devices are small LUNs presented to the Solutions Enabler host (in this case, SEVA) that are used for management communication with the array. Without properly configured and mapped Gatekeepers, SYMCLI cannot communicate with the array.

Correct answer: A single snapshot can be linked to multiple target devices, and each link can be read-write.

A key feature of SnapVX is its flexibility. A single source device can have up to 1024 snapshots, and each of those snapshots can be linked to up to 1024 target devices simultaneously. Each linked target is a fully readable and writable copy, making it ideal for use cases like dev/test, reporting, and analytics where multiple teams need access to a point-in-time copy of the data.

Correct answer: True

This statement is true. Through the VASA (vSphere APIs for Storage Awareness) Provider, the PowerMax array advertises its capabilities, including its Service Levels, to vCenter. A VMware administrator can then create storage policies in vSphere that map directly to these array-native Service Levels. When a VM is provisioned with a specific policy, the PowerMax array automatically creates the necessary vVols in a Storage Group with the corresponding Service Level, thus enforcing the performance SLO at the array level.

Correct answer: The array is meeting the SG's performance target, but with elevated system resource usage.

Storage Group compliance in Unisphere for PowerMax has several states. A 'Marginal' state specifically indicates that the array is currently meeting the Service Level Objective (SLO) for response time for that SG, but it is having to work harder than normal (i.e., using more system resources) to do so. This is a predictive indicator that if the workload increases or array contention rises, the SG is at risk of falling out of compliance and entering a 'Critical' state.

Correct answer: Monitor

Unisphere for PowerMax provides several built-in roles for role-based access control (RBAC). The 'Monitor' role is specifically designed for users who need read-only access. It allows viewing of all configuration, performance, and alert information without granting any permissions to modify the system. This perfectly fits the requirement for a junior administrator who only needs to observe the environment.

Correct answer: symsnapvx -g ProdDB_SG establish -name NightlyCopy

The `symsnapvx establish` command is the correct SYMCLI command to create a new TimeFinder SnapVX snapshot. The `-g` flag specifies the source Storage Group (ProdDB_SG), and the `-name` flag assigns a user-friendly name to the snapshot for easy identification and management in subsequent script steps, such as linking and terminating.

Correct answer: A recommendation for the optimal Service Level and an estimate of the required capacity on the PowerMax.

The Workload Planning tool in Unisphere is designed for 'what-if' analysis. By ingesting performance data from an existing workload (either on a Dell or third-party array), it analyzes the I/O profile, throughput, and capacity requirements. Its primary function is to then model how that workload would behave on the target PowerMax array, recommending the most appropriate Service Level (e.g., Gold, Platinum) and providing an accurate estimate of the capacity needed to support it while meeting performance SLOs.

Correct answer: To act as a secure communication channel for SYMCLI commands to the Symmetrix control plane.

A Gatekeeper (or GK) is a small (typically 6MB) device presented from the PowerMax/VMAX array to the host running Solutions Enabler. It does not store user data. Its sole purpose is to serve as a target for SYMCLI to send management and control I/O operations to the array's internal control plane (Symmetrix directors). This dedicated channel is how SYMCLI executes all its management functions.

Correct answer: SRDF/Star

SRDF/Star is the specific topology designed for three-site disaster recovery. It combines different SRDF modes to achieve the desired RPO/RTO at each site. In this scenario, SRDF/S (Synchronous) or SRDF/Metro would be used between Site A and Site B for zero data loss (RPO=0), while SRDF/A (Asynchronous) would be used from the primary workload site (the 'star point,' usually Site A) to the remote Site C. The 'bunker' site (Site B) also maintains a replication link to Site C, providing comprehensive protection.