Free HPE6-A89 sample questions
Real questions from the HPE Networking Comware Exam practice bank, with the correct answer and an explanation for each one. No junk, no filler.
Try them in the simulator Same questions, with study, timed and flashcard modes.
Showing 10 of 20 free sample questions.
A network administrator is building a two-member IRF stack with HPE 5900 series switches. Which TWO actions are mandatory for establishing the IRF fabric correctly? (Select TWO)
True or False: In a Zero Trust Architecture implemented on a Comware network, a key principle is to trust traffic originating from internal VLANs by default, while strictly inspecting all external traffic.
On an HPE Comware switch, which port link type should be configured on an interface that connects to an end-user device, like a PC, that requires access to a single VLAN?
A network administrator has enabled IGMP snooping globally on a Comware switch to optimize multicast traffic for an IPTV deployment. Despite this, users in VLAN 100 are still experiencing multicast flooding from all streams. Unicast and broadcast traffic are behaving normally. What is the most likely reason for this issue?
An engineer is writing an Ansible playbook to configure VLANs on several HPE Comware switches. The task should only be executed if the target device's operating system is Comware. Which Ansible conditional statement correctly uses Ansible facts to achieve this?
A Comware router is an ABR connecting OSPF Area 1 to the backbone Area 0. A network administrator wants to minimize the routing table on routers within Area 1 by blocking both external routes (Type 5 LSAs) and inter-area summary routes (Type 3 LSAs), allowing only a single default route to be injected by the ABR. Which OSPF area type should be configured for Area 1? graph TD subgraph Area 0 (Backbone) R1 R_External[(External Network)] end subgraph Area 1 R2 R3 end R_External -- ASBR --- R1 R1 -- ABR --- R2 R2 --- R3
During a network audit, a static route and an OSPF-learned route exist for the same destination prefix 192.168.100.0/24 in the routing table of a Comware switch. By default, which route will be installed in the forwarding table and why?
A consultant needs to design a high-availability solution for a campus core using two HPE FlexFabric 7900 switches. The goals are to provide a single logical management point, eliminate Spanning Tree Protocol between the core switches, and enable active-active uplinks from the access layer switches. Which HPE Comware technology should be implemented to meet all these requirements?
A financial services company requires a multicast solution for distributing real-time stock market data. The network has thousands of potential receivers, but at any given time, only a small, sparsely distributed number of them are active. The solution must be efficient and avoid flooding unnecessary traffic. Which multicast routing protocol is most suitable for this scenario?
10 more free samples are waiting
Create a free account to unlock the whole HPE6-A89 sample bank, or get full access to all 240 practice questions in the simulator.