2V0-13-24 sample questions

Question 1

During the design phase of a VCF 5.2 deployment, an architect is presented with the following requirements for the Management Domain:

- The environment will eventually scale to the VCF maximum of 15 VI Workload Domains.
- Operational simplicity and minimizing the physical hardware footprint for management components are key business drivers.

Based on these requirements, which VCF architectural model should be selected for the Management Domain?

Accepted Answer

Standard Architecture, because Consolidated Architecture has a lower scale limit for Workload Domains.

Answer

Standard Architecture, because it is required for scaling beyond a single VI Workload Domain.

Answer

Consolidated Architecture, because it minimizes the hardware footprint.

Answer

Consolidated Architecture, because it can be converted to a Standard Architecture later without downtime.

Question 2

An architect is designing a multi-site VCF 5.2 solution and needs to decide on the placement of the witness host for a stretched vSAN cluster. The two data centers (AZ1 and AZ2) have a 5ms round-trip time (RTT) latency between them. A third site (AZ3) is available, which has a 150ms RTT to both AZ1 and AZ2. Which TWO of the following are valid design decisions for the witness host placement? (Select TWO)

Accepted Answer

Deploy the witness host in AZ3.

Accepted Answer

Deploy the witness host as a VM in a public cloud provider.

Answer

Deploy the witness host in AZ1.

Answer

Deploy the witness host in AZ2.

Answer

Do not deploy a witness host and configure a preferred site.

Question 3

A university is implementing VCF 5.2 to host its student information system. A key requirement is to ensure that during a major VCF upgrade managed by SDDC Manager, the student information system VMs remain operational and are not migrated. Which feature should the architect incorporate into the design to meet this requirement?

Accepted Answer

Use vSphere Lifecycle Manager (vLCM) to pin the VMs to their current hosts.

Answer

Place the VMs in a separate resource pool with a 'Do not migrate' tag.

Answer

Use vSphere HA VM Overrides to disable vMotion for the specific VMs.

Answer

Disable DRS on the cluster before starting the upgrade process.

Question 4

True or False: In a VCF 5.2 Standard Architecture, the NSX Edge Cluster for the Management Domain must be deployed within the Management Domain's vSphere cluster.

Accepted Answer

False

Answer

True

Question 5

A design document for a new VCF environment includes the following statement: "The solution will provide 99.99% uptime for Tier 1 applications, ensuring business continuity." This statement is an example of which type of design element?

Accepted Answer

A business requirement

Answer

A technical requirement

Answer

A constraint

Answer

An assumption

Question 6

An architect is creating a conceptual design for a VCF deployment. Which of the following elements would typically be included in this high-level design document?

```mermaid
mindmap
root((Conceptual Design))
Key Business Drivers
Agility
Cost Reduction
High-Level Architecture
Single Datacenter
Standard VCF Model
Core Capabilities
IaaS
Disaster Recovery
Assumptions & Risks
Assumption: Existing network supports 25GbE
Risk: Supply chain delays for hardware
```

Accepted Answer

A list of key business drivers and high-level stakeholder goals.

Answer

IP addressing schemes and VLAN IDs for all management components.

Answer

Specific ESXi host models and storage device part numbers.

Answer

A detailed host naming convention for the Management Domain.

Question 7

A global media company requires a VCF 5.2 design that provides workload mobility and centralized network policy management across three geographically dispersed data centers in North America, Europe, and Asia. The design must allow for seamless VM migration and consistent security posture across all sites. Which VMware technology should be the centerpiece of this design?

Accepted Answer

NSX Federation

Answer

vSAN Stretched Clusters

Answer

Site Recovery Manager

Answer

Aria Automation Orchestrator

Question 8

An e-commerce platform is being designed on VCF 5.2. A primary business requirement is to prevent any single hardware failure from causing an outage. The architect decides to use N+1 redundancy for all components. This design decision directly addresses which principle of the AMPRS framework?

Accepted Answer

Availability

Answer

Manageability

Answer

Performance

Answer

Security

Question 9

**Case Study:**

A regional healthcare provider, HealthFirst, is consolidating its data centers and modernizing its infrastructure with VMware Cloud Foundation 5.2. They plan to host a new Electronic Health Records (EHR) system, a patient portal, and various administrative applications. The provider operates two data centers, Site A and Site B, located 10km apart with dedicated dark fiber providing 100Gbps connectivity and a consistent round-trip latency of 2ms.

**Business and Technical Requirements:**
- The EHR system is mission-critical and requires zero downtime, even in the event of a full site failure. The RPO must be 0.
- All patient data must be encrypted both at-rest and in-transit to comply with healthcare regulations.
- The patient portal experiences highly variable traffic and must scale automatically to handle peaks in demand.
- A new VDI environment will be deployed for clinical staff, which requires dedicated GPU resources.
- The solution must be managed from a single SDDC Manager instance.

**Constraints:**
- The VDI environment must be physically and logically separate from the EHR system.
- The existing storage arrays will not be used; all storage must be provided by vSAN.

Given the scenario, which is the most effective high-level design to meet all of HealthFirst's requirements?

Accepted Answer

Deploy a single VCF instance with a Standard architecture. Create one VI Workload Domain stretched across Site A and Site B for the EHR system. Create a separate, non-stretched VI Workload Domain at Site A for the VDI environment with GPU-equipped hosts. Enable vSAN encryption on both domains.

Answer

Deploy two separate VCF instances, one at each site. Use Site Recovery Manager for EHR disaster recovery. Create a VDI cluster at Site A. Use NSX Federation to manage networking between the instances.

Answer

Deploy a single VCF instance with a Consolidated architecture stretched across both sites. Place EHR and VDI workloads in separate clusters within this domain. Use vSphere VM-Host affinity rules to pin VDI VMs to GPU hosts.

Answer

Deploy a single VCF instance at Site A and use vSphere Replication to protect the EHR system to Site B. Create a VI Workload Domain for EHR and another for VDI, both at Site A.

Question 10

When designing the physical network infrastructure for a VCF 5.2 deployment that will use vSAN ESA, what is the minimum recommended network speed for the host uplinks to ensure optimal performance and avoid bottlenecks?

Accepted Answer

25 GbE

Answer

1 GbE

Answer

10 GbE

Answer

40 GbE

Free 2V0-13-24 sample questions

True or False: In a VCF 5.2 Standard Architecture, the NSX Edge Cluster for the Management Domain must be deployed within the Management Domain's vSphere cluster.

A design document for a new VCF environment includes the following statement: "The solution will provide 99.99% uptime for Tier 1 applications, ensuring business continuity." This statement is an example of which type of design element?

An e-commerce platform is being designed on VCF 5.2. A primary business requirement is to prevent any single hardware failure from causing an outage. The architect decides to use N+1 redundancy for all components. This design decision directly addresses which principle of the AMPRS framework?

When designing the physical network infrastructure for a VCF 5.2 deployment that will use vSAN ESA, what is the minimum recommended network speed for the host uplinks to ensure optimal performance and avoid bottlenecks?

10 more free samples are waiting